Some must have extras to fit to your Aircraft.
Items can be bought easily online using If you do not already use this you can sign up to the service and pay by credit card. Alternativily please email me (details on contacts page) for other payment methods, and best postal rates if buying multiple items.
Some items e.g. Lexan parts/towbars are normally made to order so may take a couple of weeks to delivery.
Prices are in EURO
Hawk BCAR Section 'S' Build Manual
A detailed construction manual written for BCAR Section 'S' compliance with colour photo's showing the complete construction of the aircraft.
Each manual contains information on the UK modifications, engine installation's, fuel system's, colour wiring diagram's, Placard templates etc.
A lot of time has went into writting this manual and it is supplied bound & printed on high resolution paper to make the photographs clear.
Control Column Gaiters
Make your aircraft stand out from the rest with these leather gaiters for the control columns.
Available in Red, Blue, and Yellow. Price pair with fitting kit.
Oil Level Access Hatch
Check the oil level without having to remove the bonnet,
Comes as a CNC cut kit of parts.
Gas Door Strut kit
Great addition to your Hawk Doors.
This Gas strut kit, opens the door for you, and also pulls it close.
Fresh Air Vents
Air Vents that can be added to the door or the windscreen.
A must for those hot days, and also needed for safety if fitted with cabin heat. Opened and Closed by turning a knob.
CNC cut available in 57mm or 79mm sizes designed to use standard instrument holesaws for cutting of fitting hole.
Aerial designed for the Xair Hawk (H model), fits under the bolt at the rear of the roof, and has correct length cable to reach the dashboard.
Also made to match colours of the aircraft, e.g. White/red/ Hawk will have a red aerial with a white tip, blue/yellow Hawk will have a yellow aerial with a blue tip etc.
Mention colour of aircraft on Paypal payment or email.
Nose Leg Gaiters
Rubber Gaiters that fit the Hawk noseleg and keep the dirt out of the slot and sliding section.
Kit is supplied with two gaiters and cable ties for retaining.
Cowling Camloc Fasteners
Kit of 15 1/4 turn camloc fasteners, retainers and fixing rivets to replace the standard screws on your cowling top and make removal much quicker and easier.
Electric Carb Heat Kit
12v powered Carb Heat kit, that bolts onto the Bing carb body and prevents ice from forming.
Comes as a kit of parts with wiring, relay, switch and indicator LED.
Brass adapters specially made to suit the 8mm drain fitting on the xair fuel tanks.
Wing Fold Parts Kit
The Wings on the Hawk wing fold, however some simple modifications can be incorporated to make the job even easier.
These consist of tapered plugs for the strut and wing tube ends. Kit consists of 6 nylon ends.
Hawk Tow Bar
Nicely made towbar that fits onto the Hawk front forks and locks in place, for easy manouvering of your aircraft.
Replacement Tires for the Xair, Falcon & Hawk that are .9kg lighter than kit supplied versions.
Tires are 4 ply, size 4.00-8, rated at 220Kg per tire
Temp out of Stock
50mm wide dacron fabric repair tape. Self adhesive back.
Available in Red, Yellow, Blue, Green, White & Grey, sold per 500mm
€1.95 per 500mm (18"). Max length one piece is 3M